System Status

Last updated: --:--:--

System Online
Uptime
0h 0m
Active Alerts
0
WiFi Signal
Excellent
MQTT Status
Connected
Filtered Water DO
-- mg/L
Normal
Sea Water DO
-- mg/L
Normal
Power
-- W
Normal
Voltage
-- V
Active

Filtered Water (Node 1)

Normal
Dissolved Oxygen: -- mg/L
pH Level: --
Turbidity: -- NTU
Temperature: -- °C

Sea Water (Node 2)

Normal
Dissolved Oxygen: -- mg/L
pH Level: --
Turbidity: -- NTU
Temperature: -- °C

Power Monitor (PZEM-017)

Normal
Voltage: -- V
Current: -- A
Power: -- W
Energy: -- kWh
Frequency: -- Hz
Power Factor: --

Environment (BME280)

Active
Air Temperature: -- °C
Humidity: -- %
Pressure: -- hPa
Altitude: -- m

Relay Controller

Active
Intake Pump: OFF
Outtake Pump: OFF
Waste Valve: OFF
Sea Valve: OFF
Lamp: OFF
Alarm: OFF
Backup: OFF

Water Level Monitoring

Normal
Tank 1 Level: --
Tank 2 Level: --
High Switch: OFF
Low Switch: OFF

Recent Alerts

View All
No recent alerts

Coral Water Monitoring (Node 1)

Real-time water quality parameters

Normal
Dissolved Oxygen
7.0
mg/L
Range: 6.0 - 8.5 mg/L
pH Level
8.1
pH
Range: 7.8 - 8.5 pH
Turbidity
2.0
NTU
Range: 0 - 5 NTU
Water Temperature
26
°C
Range: 24 - 30 °C

Current Readings

Updated: --:--:--
Dissolved Oxygen:
-- mg/L
Normal: 6.5-8.0 mg/L
pH Level:
--
Normal: 7.9-8.3 pH
Turbidity:
-- NTU
Normal: 0-4 NTU
Temperature:
-- °C
Normal: 25-28 °C

24-Hour Statistics

Dissolved Oxygen
Min: 6.2 mg/L Avg: 7.1 mg/L Max: 7.8 mg/L
pH Level
Min: 7.9 Avg: 8.1 Max: 8.3
Turbidity
Min: 0.5 NTU Avg: 2.1 NTU Max: 3.8 NTU
Temperature
Min: 24.5 °C Avg: 26.2 °C Max: 27.8 °C

Historical Trends (Last 24 Hours)

Sensor Information

Node ID: Node 1 - Coral Tank
Communication: RS485 Active
Sensor Status: All Online
Last Calibration: 25 Jan 2026
Next Calibration: 25 Feb 2026

Quick Actions

Filtered Water Monitoring (Node 2)

Post-filtration water quality parameters

Normal
Dissolved Oxygen
8.0
mg/L
Range: 7.0 - 9.0 mg/L
pH Level
7.0
pH
Range: 6.5 - 7.5 pH
Turbidity
0.5
NTU
Range: 0 - 2 NTU
Water Temperature
26
°C
Range: 24 - 30 °C

Filtration Effectiveness

DO Improvement
+12%
pH Stabilization
Optimal
Turbidity Reduction
-75%
Filter Efficiency
98%

Current Readings

Updated: --:--:--
Dissolved Oxygen:
-- mg/L
Target: > 7.5 mg/L
pH Level:
--
Target: 6.8-7.2 pH
Turbidity:
-- NTU
Target: < 1.0 NTU
Temperature:
-- °C
Normal: 25-28 °C

Filter System Status

Filter Type: Multi-Stage Mechanical
Flow Rate: 150 L/hour
Filter Age: 45 days
Recommended Change: 90 days
Filter Health: Excellent
Filter Life: 50% remaining (45 days until replacement)

Water Quality Trends (Last 24 Hours)

Sensor Information

Node ID: Node 2 - Filtered Tank
Communication: RS485 Active
Sensor Status: All Online
Last Calibration: 25 Jan 2026
Next Calibration: 25 Feb 2026

Maintenance Schedule

Next filter replacement in 45 days
• Clean pre-filter: Weekly
• Check filter media: Bi-weekly
• Replace filter: Every 90 days
• System inspection: Monthly

Filtration Control System

Pump & valve control for water circulation

Auto Mode

Control Mode

Automatic Mode: System controls pumps and valves based on sensor readings and predefined thresholds.

Pump 1 - Intake

Running
State: ON
Speed: 75%
Flow Rate: 150 L/h
Runtime Today: 6h 30m
Power Draw: 45 W
0% 75% 100%

Pump 2 - Return

Running
State: ON
Speed: 80%
Flow Rate: 160 L/h
Runtime Today: 6h 30m
Power Draw: 48 W
0% 80% 100%

Solenoid Valve Control

Valve 1 - Inlet
OPEN
Valve 2 - Bypass
CLOSED
Valve 3 - Outlet
OPEN
Drain Valve
CLOSED

System Status

Total Flow Rate: 310 L/h
Filter Pressure: 0.8 bar
System Efficiency: 98%
Power Consumption: 93 W
Next Maintenance: 42 days
All systems operating normally

Operation Schedule

Morning Cycle Active
06:00 - 10:00 | Pump 1: 80%, Pump 2: 85%
Afternoon Cycle Scheduled
14:00 - 18:00 | Pump 1: 75%, Pump 2: 80%
Night Cycle Scheduled
20:00 - 06:00 | Pump 1: 60%, Pump 2: 65%
Maintenance Mode Disabled
Manual override - All pumps OFF
Power & Solar - Coming Soon
Pumps & Valves - Coming Soon
Alerts & Logs - Coming Soon
Analytics - Coming Soon
Device Status - Coming Soon
Settings - Coming Soon